Chemglass三
![]() ![]() Reaction vessel lid is constructed entirely of PTFE. Low-form lid has eight openings: (A) center neck 1female NPT for PTFE standard taper adapter, (B) side necks 1-12female NPT [更多] ![]() ![]() Reaction vessel lid is constructed entirely of PTFE. Low-form lid has nine openings: (A) center neck 1female NPT for PTFE standard taper adapter, (B) side necks 1female NPT, ve [更多] ![]() ![]() The Chemglass high flow manifold system allows for easy and safe connection of your circulator to our glass process reactors. Manifold helps alleviate excessive mechanical for [更多] ![]() ![]() Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 34female NPT for PTFE standard taper adapter, (B) side necks 34female NPT, [更多] ![]() ![]() Zero Dead Space drain valve, similar to CG-1968-Q, with the addition of a torque knob to prevent over tightening of drain valve. B>PLEASE NOTE: TO RETROFIT YOUR EXISTING CG-1 [更多] ![]() Five neck vessel lid to fit CG-1920 through CG-1936 vessels. Lid has a flat ground surface allowing it to be greased or used with an o-ring. Note: Five neck lids are available [更多] ![]() Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The #7 Chem-Thread will allow a thermometer or bleed tube having an O.D. of 4 to 7mm to be inserted vertically to [更多] ![]() ![]() Four neck reaction vessel lid to fit CG-1930 through CG-1931 vessels. Side necks are on a 30° angle. Lid has a flat ground surface allowing it to be greased or used with an [更多] ![]() Four neck vessel lid to fit CG-1920 through CG-1936 vessels. The 1030 outer joint will permit a thermometer to be inserted vertically to the bottom of the vessel. Lid has a fl [更多] |