Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 3/4female NPT for PTFE standard taper adapter, (B) side necks 3/4female NPT, vertical for PTFE standard taper adapters, (C) side neck 1female NPT with 10° X 10° compound angle for Teflon compression fitting used with Lasentec® Probe, and (D) side necks 1/4female NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 14mm Teflon compression fitting for 10° X 10° compound angle side neck, and three 1/4male NPT PTFE plugs. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Special neck sizes and configurations are available. Please contact us for details. PLEASE NOTE: DUE TO SPACE CONSTRAINTS ON THE LID, WE RECOMMEND USING THE CG-2077 OR CG-2077-H 10MM TEFLON BEARING WITH THE LOOSENING NUT REMOVED.

Lasentec® is a registered trademark of Mettler Toledo.

Item Number	Item Description	PQ
CG-1945-T-12	7-Neck PTFE Reaction Vessel Lid Only, 100mm, Without Joint Adapters	EACH
CG-1945-T-21	PTFE Standard Taper Adapter, 24/40 Outer, 3/4" Male NPT	EACH
CG-1945-T-22	PTFE Standard Taper Adapter, 29/42 Outer, 3/4" Male NPT, Side Neck	EACH
CG-1945-T-34	PTFE Standard Taper Adapter, Extended Length, 29/42 Outer, 3/4" Male NPT, Center Neck	EACH
CG-1945-T-60	7-Neck PTFE Reaction Vessel Lid, 100mm, 24/40 Outer, 92mm Overall Height	EACH
CG-1945-T-62	7-Neck PTFE Reaction Vessel Lid, 100mm, 29/42 Outer, 135mm Overall Height	EACH
CG-1945-T-90	PTFE Plug, 1/4" Male NPT	EACH
CG-1945-T-95	14mm PTFE Compression Fitting for Lasentec Probe, 1" Male NPT	EACH
CG-1945-T-96	19mm PTFE Compression Fitting for Lasentec Probe, 1" Male NPT	EACH