Reaction vessel lid is constructed entirely of PTFE. Low-form lid has nine openings: (A) center neck 1female NPT for PTFE standard taper adapter, (B) side necks 1female NPT, vertical for PTFE standard taper adapters, (C) side neck 1female NPT with 10° X 10° compound angle for Teflon compression fitting used with Lasentec® Probe, and (D) side necks 1/2female NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 19mm Teflon compression fitting for 10° X 10° compound angle side neck, and four 1/2male NPT PTFE plugs. For clamp see CG-141 or CG-141-T. For o-ring see CG-147. Special neck sizes and configurations are available. Please contact us for details.

Lasentec® is a registered trademark of Mettler Toledo.

Item Number	Item Description	PQ
CG-1945-T-70	9-Neck PTFE Reaction Vessel Lid, 150mm, 24/40 Outer, 102mm Overall Height	EACH
CG-1945-T-72	9-Neck PTFE Reaction Vessel Lid, 150mm, 29/42 Outer, 104mm Overall Height	EACH
CG-1945-T-74	9-Neck PTFE Reaction Vessel Lid, 150mm, CN 45/50, SN 24/40 Outer, 112mm Overall Height	EACH
CG-1945-T-76	9-Neck PTFE Reaction Vessel Lid, 150mm, CN 45/50, SN 29/42 Outer, 112mm Overall Height	EACH
CG-1945-T-13	9-Neck PTFE Reaction Vessel Lid Only, 150mm, Without Joint Addapters	EACH
CG-1945-T-25	PTFE Standard Taper Adapter, 24/40 Outer, 1" Male NPT	EACH
CG-1945-T-26	PTFE Standard Taper Adapter, 29/42 Outer, 1" Male NPT	EACH
CG-1945-T-28	PTFE Standard Taper Adapter, 45/50 Outer, 1" Male NPT	EACH
CG-1945-T-91	PTFE Plug, 1/2" Male NPT	EACH
CG-1945-T-96	19mm PTFE Compression Fitting for Lasentec® Probe, 1" Male NPT	EACH
CG-1945-T-97	25mm PTFE Compression Fitting for Lasentec® Probe	EACH