Chemglass六
DISTILLATION RECEIVERS Cow type design has three receivers 45° apart. Condensers with lower drip tip inner joints will protrude into the spherical section, permitting the distillate to fall direc [更多] DISTILLATION RECEIVERS The 135° angle between the center line of the condenser and the receiver tubes allows the distillate to fall directly into the receiver tubes. This receiver can be used wi [更多] DISTILLATION RECEIVERS, SOLVENT RECOVERY, GRADUATED Graduated distillation receiver with a 4mm three way stopcock to permit solvent removal through the 10mm O.D. tube or return to distillation flask. Upper sampling port has a 2m [更多] DISTILLING RECEIVERS, DEAN-STARK, MODIFIED This innovative and compact Dean-Stark receiver is designed for azeotropic distillations using solvents that are heavier than water. The solvent vapor travels through tube 揂to [更多] DISTILLING RECEIVERS, MOISTURE TEST Modified Dean-Stark receiver designed for solvents that are either lighter or heavier than water. The lower three-way Teflon stopcock allows for the withdraw or return of the d [更多] DISTILLING RECEIVERS, MOISTURE TEST, MERLIC** Modified Dean-Stark trap allows for more efficient cooling and separation of the azeotrope during distillation. Graduated from 0 to 10ml in 0.1mL subdivisions. Design suggested [更多] DISTILLING RECEIVERS, MOISTURE TEST, BARRETT Similar to CG-1261 but with the addition of an overflow tube between the uptake tube and the graduated receiver.b>b> [更多] DISTILLING RECEIVERS, MOISTURE TEST, BARRETT, VACUUM JACKETED Similar to CG-1261 but with the uptake tube vacuum jacketed to improve distillation performance. The jacket eliminates the possibility of condensation or recrystallization of d [更多] DISTILLING RECEIVERS, MOISTURE TEST, BARRETT
Barrett style distilling receiver used to determine the water content in petroleum or bituminous material. Receiver is made according to ASTM specifications, with the addition [更多] |