Chemglass六
![]() ![]() Round bottom, HEAVY WALL single short neck flask for use on rotary evaporators for receiving distillate. Joint at the top of the flask is a 3525 socket. Plastic coated to pre [更多] ![]() ![]() Trap provides expanded volume for reactions that have a tendency to foam excessively. The inner vapor tube is sealed to the top of the trap to prevent entry into the condenser. [更多] ![]() ![]() Similar to CG-1320, but with the addition of two 4mm drain holes at the base of the inner tube to allow solvent to drain back into the evaporation flask. Traps have a 2440 top [更多] ![]() ![]() Used between the vapor tube and evaporation flask on a rotary evaporator to prevent contents of the flask from being drawn into the condenser in the event of 揵umping.Traps have [更多] ![]() ![]() Flasks to fit large scale rotary evaporators. Flasks have a HEAVY WALL for vacuum applications and are balanced to prevent run-out during rotation. Available plain or plastic [更多] ![]() ![]() Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 4540 lower inner drip joint, a 1938 stopcock plug, and removable hose connections using GL- [更多] ![]() ![]() Two piece cold trap style condenser for use with rotary evaporators. Condenser has an additional 1938 outer joint sealed onto the condenser to allow continuous feed of volumes [更多] ![]() ![]() Two piece cold trap style condenser for use with rotary evaporators. Condenser has a 50mm flange on the side, a 3520 lower ball joint, a 1938 stopcock plug and removable hose c [更多] ![]() ![]() Double coil condenser for use with rotary evaporators for cooling with tap water in a vertical position. Condenser has a 4540 lower inner drip tip joint, a 2926 top outer joint [更多] |