Chemglass二
GLASSBLOWERS FLASK BLANKS, FLAT BOTTOM Blanks for faication of single or multi-neck flat bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.b>b> [更多] GLASSBLOWERS FLASK BLANKS, ROUND BOTTOM Blanks for faication of single or multi-neck round bottom flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK. Note: 50 and 72 Liter Sizes are [更多] GAS DISPERSION TUBES, FRITTED Hollow fritted cylinder at the end of an 8mm O.D. tube. Cylinder is approximately 12mm O.D. x 20mm long. Overall length is approximately 10in.b>b> [更多] TUBES, GAS DISPERSION, LARGE CAPACITY, FRITTED Large capacity gas dispersion tube having a frit 25mm O.D. x 70mm long. Stem is 16mm O.D. x 200 mm above the frit. Overall length is approximately 280mm.b>b> [更多] GLASSBLOWERS FLASK BLANKS, RECOVERY Blanks for faication of recovery flasks. NOTE: NECK IS UNFINISHED, FLASK CANNOT BE USED WITHOUT MODIFICATION OF NECK.b>b> [更多] IMPINGERS, GREENBERG-SMITH, 45/50 High velocity impinger used in the determination of dust concentration in air or other non-condensable gases, as per EPA Method 5. With 4550 joints on both bottle and stopper. [更多] MIDGET BUBBLERS, GRADUATED Similar to CG-1820, but with the nozzle being replaced with an extra coarse fritted gas dispersion tube which enhances absorption by trapping the liquid. Available with 125 or [更多] MIDGET IMPINGER, GRADUATED Micro impinger designed for sampling of small volumes of air at low jet velocity, as per EPA Method 6. Impinger bottle is graduated from 5 to 30ml in 5ml subdivisions. Both th [更多] GAS MANIFOLDS, 4-PLACE, GLASS STOPCOCKS
Four port manifold with 2mm bore glass stopcocks on the ports. A 揟bore stopcock is located 100mm from the end of the manifold and 40mm from the first port. The distance betwe [更多] |