Reaction vessel lid is constructed entirely of PTFE. Low-form lid has seven openings: (A) center neck 1/2female NPT for PTFE standard taper adapter, (B) side necks 3/4female NPT, vertical for PTFE standard taper adapters, (C) side neck 3/4female NPT with 10° X 10° compound angle for Teflon compression fitting used with Lasentec® Probe, and (D) side necks 1/4female NPT. Lid is supplied complete with listed PTFE standard taper adapters for center and vertical side necks, 14mm Teflon compression fitting for 10° X 10° compound angle side neck, and three 1/4male NPT PTFE plugs. For Teflon coated clamp see CG-141-T-10. For FEP-Encased Stainless Steel o-ring see CG-147-79. Special neck sizes and configurations are available. Please contact us for details. PLEASE NOTE: DUE TO SPACE CONSTRAINTS ON THE LID, WE RECOMMEND USING THE CG-2077 OR CG-2077-H 10MM TEFLON BEARING WITH THE LOOSENING NUT REMOVED.

Lasentec® is a registered trademark of Mettler Toledo

Item Number	Item Description	PQ
CG-1945-T-50	7-Neck PTFE Reaction Vessel Lid, 80mm, 24/40 Outer, 118mm Overall Height	EACH
CG-1945-T-11	7-Neck PTFE Reaction Vessel Lid Only, 80mm, Without Joint Adapters	EACH
CG-1945-T-33	PTFE Standard Taper Adapter, 24/40 Outer, Center Neck, 1/2" Male NPT	EACH
CG-1945-T-21	PTFE Standard Taper Adapter, 24/40 Outer, Side Neck, 3/4" Male NPT	EACH
CG-1945-T-90	PTFE Plug, 1/4" Male NPT	EACH
CG-1945-T102	14mm PTFE Compression Fitting for Lasentec® Probe, 3/4" Male NPT	EACH
CG-1945-T106	19mm PTFE Compression Fitting for Lasentec® Probe, 3/4" Male NPT	EACH