Standard taper inner and outer lengths tooled on longer lengths or different sizes than normally available under part numbers CG-100 through CG-105. These joints offer the glassblower the opportunity to construct apparatus made of heavier tubing or without unnecessary seals.

Item Number	Item Description	PQ
CG-109-03	24/40 Inner Joint, 16in OAL, on 22mm OD x 1.8mm W tubing	EACH
CG-109-04	24/40 Inner Joint, 16in OAL, on 28mm OD x 2mm W tubing	EACH
CG-109-10	34/45 Drip Joint, 16in OAL, on 32mm OD x 2.4mm W tubing	EACH
CG-109-11	45/50 Drip Joint, 16in OAL, on 41mm OD x 2mm W tubing	EACH
CG-109-19	14/20 Outer Joint, 6in OAL, on 22mm OD x 1.8mm W tubing	EACH
CG-109-28	24/40 Outer Joint, 16in OAL, on 25mm OD x 1.5mm W tubing	EACH
CG-109-29	24/40 Outer Joint, 12in OAL, on 28mm OD x 2mm W tubing	EACH
CG-109-30	24/40 Outer Joint, 16in OAL, on 28mm OD x 2mm W tubing	EACH
CG-109-40	29/42 Outer Joint, 12in OAL, on 35mm OD x 2mm W tubing	EACH
CG-109-46	34/45 Outer Joint, 16in OAL, on 38mm OD x 2mm W tubing	EACH
CG-109-47	45/50 Outer Joint, 16in OAL, on 48mm OD x 2mm W tubing	EACH
CG-109-49	45/50 Outer Joint, 16in OAL, on 57mm OD x 2.4mm W tubing	EACH
CG-109-50	55/50 Outer Joint, 16in OAL, on 54mm OD x 2.4mm W tubing	EACH